Medium Range Jets Underloading | Calculation Of Aircraft Mass And Balance | Lecture 14

Medium Range Jets Underloading | Calculation Of Aircraft Mass And Balance | Lecture 14

Inputting Data into the Trim Sheet for Medium Range Jet Transport

Understanding the Trim Sheet Process

  • The trim sheet part B is used to input data regarding distribution and trim positions, helping pilots establish zero fuel mass and takeoff mass center of gravity as a percentage of mean aerodynamic chord.
  • The landing mass center of gravity position is typically not required since it remains within limits due to fuel usage during flight.

Using the Scale in Cargo, Passenger, and Fuel Boxes

  • An example illustrates how to use the scale: starting with a dry operating index (DOI) of 45.00, which corresponds to an arrowed box indicating that one unit equals 100 kilograms.
  • For a mass of 600 kilograms, move six units left on the scale; for 1850 kilograms, move right 18.5 units.

Entering Passenger Loads

  • Continue entering cargo and passenger loads by dropping vertical lines down through each box until all data is entered.
  • Each compartment's limiting mass must be noted; for hold one, enter 600 kilograms and adjust accordingly based on previous entries.

Establishing Zero Fuel Mass Index

  • To find take-off mass index from zero fuel mass index, apply adjustments using fuel index correction tables found in CAP 696.
  • Use the next higher mass if exact values are unavailable; for instance, use an index for 14580 kg resulting in -12.9 units.

Calculating Center of Gravity Positions

  • Locate take-off mass (62,170 kg), extend a horizontal line to intersect with take-off mass index line in the envelope to read off center of gravity as 18.3 mean aerodynamic chord.
  • Similarly determine zero fuel mass center of gravity at 22.35 mean aerodynamic chord by locating its corresponding value on the vertical axis.

Finalizing Trim Settings

  • For flap settings at takeoff (e.g., flap 5 degrees), use previously calculated center of gravity position to find appropriate trim setting between figures three and four in the envelope.

Example Question Application

  • A typical exam question may ask students to determine dry operating index using provided data; draw horizontal lines from given masses to find intersections with relevant scales.

Summary of Lessons Learned

  • The lessons covered both parts A and B focusing on calculating maximum allowable traffic load while ensuring passenger and cargo distributions are within limits.

Turn any video into a summary like this

YouTube links, meetings, lectures. With transcripts, search, and chat.