Cómo montar un PC Gamer: Guía paso por paso

How to Build Your Own Gaming PC

Introduction to Building a Gaming PC

• The video serves as a comprehensive guide for anyone looking to build their own gaming PC, whether it's their first time or they are experienced builders.

• Emphasizes that building a gaming PC is straightforward and can be done at home with minimal tools and knowledge.

• Part of an educational project involving collaboration with other YouTubers, aiming to create informative content about PC building.

Tools Required for Building

• Basic tools needed include a Phillips screwdriver and possibly pliers; working on a table is recommended for comfort.

• Suggestion to use an anti-static wrist strap to protect components from static electricity, although it’s not strictly necessary.

Components Overview

• The build features an Intel i7 8700K processor, ASUS ROG Strix Z370 motherboard, HyperX RAM, and various other high-performance components.

• Storage will consist of two SSD units in RAID 0 configuration for enhanced speed.

Initial Setup Steps

• Begin by preparing the motherboard: install the cooling kit's backplate before placing the CPU.

• Installing the CPU involves aligning it correctly with the socket using designated notches as guides.

Memory Installation

• When installing RAM, ensure modules are placed in correct slots for dual-channel configuration if only two are used.

• Pay attention to the notch on RAM sticks which indicates proper orientation during installation.

Power Supply Connection

• Discusses connecting a modular power supply where users can choose which cables to use based on their needs.

Building a PC: Power Supply and Cable Management

Installing the Power Supply

• The power supply requires two 8-pin PCI Express cables for proper connection. Additional SATA power cables are needed to support both the Kraken liquid cooling system and SSD drives.

• The power supply is positioned at the back of the case, secured with screws. Ensure that all mounting points align correctly with the holes in the power supply.

Cable Routing

• Cables from the power supply are routed through designated openings in the case, including PCI Express cables for graphics cards and CPU power cables through upper openings.

• The ATX cable will be routed behind a cover to maintain a clean look while ensuring it reaches its connector on the motherboard.

Motherboard Installation

• Attaching the motherboard involves securing it to fixed anchor points within the case, ensuring alignment with connectors and screw holes.

• A backplate included with the motherboard must be installed; it fits snugly into place before positioning the motherboard itself.

Connecting Front Panel Cables

• Most cases come equipped with front panel connections such as power buttons, activity LEDs, audio ports, and USB ports. Refer to your motherboard manual for correct cable placement.

• Cables should be passed from rear to front of the motherboard using lower openings; USB 3.0 connectors are straightforward due to their one-way fit.

Finalizing Connections

• Identifying pin configurations is crucial when connecting USB 2.0 and HD audio ports; these typically have specific layouts that prevent incorrect connections.

• Some cases may feature a single cable for front panel connections; ensure you connect according to positive/negative indicators marked on each wire.

Installing Liquid Cooling System

• The Kraken liquid cooler comes pre-applied with thermal paste on its CPU contact surface; avoid touching this area during installation.

• Demonstration of how to mount fans onto radiators is provided; ensure they are securely attached within designated areas of your case.

Fan Configuration Considerations

• When installing fans, consider airflow direction—fans should ideally push air into or out of the case based on design constraints (e.g., front panel restrictions).

Building a PC: Step-by-Step Guide

Connecting Power and Thermal Paste Application

• Connect the USB 2 port on the motherboard and a power connector to the SATA power cable from the power supply. This is essential for powering components.

• Apply thermal paste on the processor if it’s not pre-applied or cleaned. A pea-sized amount, roughly the size of a lentil, should be placed in the center of the CPU.

• Securely attach the cooling head by aligning it with four screws; tighten them evenly to avoid uneven pressure that could damage the motherboard.

Installing Graphics Card

• Connect the fan to the CPU fan header on the motherboard, typically located above the processor. Ensure proper placement for optimal cooling.

• Insert graphics card into PCI-express slot, ensuring it clicks into place. Open any locking mechanism before installation and remove dust covers from back panel as needed.

• After securing graphics card with screws, connect two power cables from earlier setup to its connectors for adequate power supply.

Setting Up Storage Drives

• While only one SSD is necessary for operation, this guide will set up two in RAID 0 configuration; further details will be provided in future videos.

• Install SSD drives into designated trays at rear of case; ensure they are secured properly with screws.

• Connect each SSD to power using L-shaped connectors from earlier setup and link remaining connectors to SATA ports on motherboard.

Cable Management and Final Assembly

• Organize cables aesthetically within case using Velcro straps and compartments provided by chassis design for improved airflow and appearance.

• If using additional fans, connect them to appropriate headers on motherboard as per manual instructions; some cases have intelligent software control systems for fan management.

Powering On Your PC

• Close up and secure your case after all components are installed. Plug in power cable at bottom of PSU and remember to turn on main switch before starting up your PC.