Build a Duino-coin mining rig using NodeMCU boards

Build a Duino-coin mining rig using NodeMCU boards

Building a Mining Rig with NodeMCUs

In this video, the presenter demonstrates how to build a simple mining rig using eight NodeMCUs to mine DoInCoins. The presenter also shows how to upload the ESP8266 Arduino program to the NodeMCUs and 3D print a frame to keep them organized.

Uploading the ESP8266 Arduino Program

  • To start building the mining rig, upload the ESP8266 Arduino program to each of the eight NodeMCUs.
  • Change four things in the code: Wi-Fi SSID, Wi-Fi password, DUCO username, and board identifier name.
  • Hit upload for each board and change only the board identifier name for each one.

3D Printing a Frame for Organization

  • Design a simple frame in Fusion 360 that can hold four NodeMCUs on top and four on bottom.
  • Export as an STL file and use Ultimaker Cura slicing software with infill setting of 20 and layer height of 0.2 mm.
  • Print out the design which takes approximately five hours.
  • Assemble the frame by placing each NodeMCU into its designated slot.

Checking Status on Web Wallet

  • After turning on all eight boards, wait a few minutes for them to connect to the server.
  • Open up your web wallet account and check on your boots' status.

Power Consumption Calculations

In this section, the speaker discusses the power consumption of eight nodems and provides calculations based on values obtained from the internet.

Power Consumption Calculation

  • Eight nodems running for an entire day will consume around 26 to 27 watts.
  • The calculations are based on values obtained from the internet.

Conclusion and Call to Action

In this section, the speaker concludes the video and encourages viewers to leave a like and provide feedback in the comment section.

Video Conclusion

  • If there are any inaccuracies in the calculations provided, viewers are encouraged to leave a comment.
  • Viewers who enjoyed the video are encouraged to leave a like.
  • Feedback and suggestions can be left in the comment section.
  • Stay tuned for more mining content.

Final Statement

  • Happy mining.

Turn any video into a summary like this

YouTube links, meetings, lectures. With transcripts, search, and chat.

Video description

In this video, I'll show you how to build a Duino-coin mining rig using NodeMCU (ESP8266) boards. I have provided a step-by-step guide on how to upload the codes and start mining Duino coins on these boards. The frame used in this rig was designed in Fusion 360, sliced using Ultimaker Cura, and the later 3D printed on an Ender 3 V2 using a white PLA filament. Hope this video is informative. Thank you for watching. How to mine Duino coins using a NodeMCU - https://www.youtube.com/watch?v=GOmCY3fZnnw&t=1s Duino-coin website - https://duinocoin.com/ Download latest Duino coin release from - https://github.com/revoxhere/duino-coin/releases/tag/2.5.5 Duino coin web wallet - https://wallet.duinocoin.com/ Mine Duino coins using your Raspberry Pi board - https://www.youtube.com/watch?v=OFOYITfCcl4&t=1s Mine Duino coins using your Arduino board - https://www.youtube.com/watch?v=k1dPKOMzem4&t=144s Happy Mining!

Build a Duino-coin mining rig using NodeMCU boards | YouTube Video Summary | Video Highlight