''Wow'' modifikasi pompa air semi jet pump ,menjadi sangat kencang,. modal sambungan pipa.
Modifying a Semi Jet Pump
In this video, Andri Teknik demonstrates how to modify a semi jet pump by replacing the impeller and connecting pipes to increase water pressure.
Replacing the Impeller
- The small size of the impeller's eye is causing low water pressure.
- Replace the old impeller with a larger one and connect it to a 3/4 inch PVC pipe.
- Seal the top and side holes of the new impeller with a half-inch PVC pipe cap.
Connecting Pipes
- Connect the new impeller to an elbow joint using another 3/4 inch PVC pipe.
- Apply silicone sealant around all joints to prevent leaks.
- Attach a check valve and ensure that it is positioned correctly.
Final Assembly
- Install a strainer on the suction side of the pump and cover it with mesh film or cloth.
- Use hose clamps for easy disassembly in case of maintenance or repair.
- Apply thread seal tape on bolts before tightening them to prevent rusting.
- Test run the modified pump after allowing sufficient time for glue and sealant to dry.
Modifying a Semi-Jet Water Pump
In this video, the presenter modifies a semi-jet water pump to increase its power and efficiency. The modifications involve replacing the impeller with a PVC pipe and testing the pump's performance.
Testing the Modified Pump
- The modified pump is connected to electricity and tested for its spraying power.
- A PVC pipe is used to replace the impeller of the semi-jet water pump, resulting in a significant increase in spraying power.
- The presenter jokes about how some repairmen may direct the spray towards other dimensions due to their lack of expertise.
- The modified pump can spray up to 3 meters and is declared successful by the presenter.
Further Testing and Conclusion
- The presenter demonstrates that by shaking it, even hair can be removed using this powerful water pump.
- The video concludes with an invitation for viewers to like or share it if they found it useful.