C-DATA EPON 8 PORT OLT Configuration with VLAN || Bangla Tutorial

Introduction to C Data World

Logging In and Dashboard Navigation

• The presenter logs into the system using admin credentials, indicating successful access to the dashboard.

• The focus shifts to configuring ports, specifically wanting to set up an uplink on port G1 while noting that all other ports are currently down.

Port Configuration and VLAN Setup

• The presenter identifies that ports G1 through G4 are not tagging correctly; they will be changed from access mode to trunk mode for proper configuration.

• After applying trunk settings on ports G2, G3, and G4, the next step involves adding a VLAN configuration based on upstream requirements.

VLAN Tagging and Untagging

• The presenter configures VLAN 244 by tagging ports G1 through G4 while untagging ports 1 through 8 for plug-and-play functionality.

• Confirmation of successful addition of the VLAN is noted, followed by saving the configuration changes.

Inbound Management IP Configuration

• Moving to inbound management settings, an IP address from a private series (172.16.20.6 with a /30 subnet mask) is prepared for use.

• A gateway IP (172.16.24.85), previously used in MikroTik setups, is saved for external access via telnet.

Finalizing Ethernet Port Settings

• The presenter highlights the need to assign VLAN configurations to four Ethernet ports (G5-G8), ensuring users can connect directly without issues.

• A review of all configurations is conducted before finalizing changes; options for deleting or refreshing settings are also mentioned as part of good practice in network management.