10. ВСЕ ЧЕРТЕЖИ И РАЗМЕРЫ ДЛЯ ВАШЕЙ КУХНИ! Просто пили и собирай Кухня от А до Я часть 10.

Introduction

In this video, the speaker introduces a calculator that can be used to design and order IKEA kitchen parts for cheaper prices. The calculator includes measurements for cutting materials and calculating costs.

Designing an IKEA Kitchen with the Calculator

• Using the calculator, users can input their desired kitchen design and view the cost breakdown.

• The speaker notes that previous videos in this series should be watched before attempting to use the calculator.

• The speaker explains how to use the corner module in the calculator, which is important for designing an L-shaped kitchen.

• Users can adjust dimensions and materials in the calculator to fit their specific needs.

Creating Customized Kitchen Parts

• The speaker shows how to create customized parts using the copied dimensions from the calculator.

• Different materials are used for different parts of the kitchen, such as MDF or particleboard for shelves and doors.

• The speaker explains how to add decorative elements like panels while still saving on material costs.

Finalizing Orders

• Users must pay attention to details like edge thickness when ordering materials.

• The most complex module is shown with many different parts, including a shelf that can be customized with rounded edges.

• Once all parts have been designed and ordered, they can be assembled into a complete kitchen.

Conclusion

The video concludes by showing how easy it is to copy dimensions from one part of the calculator to another. Overall, viewers are encouraged to try out this method of designing and ordering custom kitchens.

Overview of Kitchen Module Design

In this section, the speaker provides an overview of the design for a kitchen module with two drawers and a facade. They discuss the dimensions and materials needed for each component.

Designing the Module

• The module has two drawers and a facade.

• The width is 640mm, depth is 600mm, and height is 800mm.

• The bottom drawer has a width of 400mm and depth of 600mm.

• The top drawer has the same dimensions as the bottom one but with a special insert.

• The facade consists of two panels that are both 40x40cm in size.

Choosing Drawers for the Kitchen Module

In this section, the speaker discusses choosing drawers for the kitchen module. They recommend using Boyard brand drawers due to their quality.

Choosing Drawers

• Boyard brand drawers are recommended due to their quality.

• There are three sizes available: small (70.8mm), medium (144mm), and large (212mm).

• For this module, two large drawers with a length of 550mm are needed.

Designing Modules for Refrigerators

In this section, the speaker discusses designing modules for refrigerators. They explain how to adjust shelf heights to accommodate different refrigerator sizes.

Designing Modules for Refrigerators

• Modules can be adjusted to fit different refrigerator sizes.

• A module with a height of 240cm can be made by combining two modules with heights of 200cm and 40cm.

• Shelf heights should be adjusted to allow for ventilation if using shelves above or below refrigerators.

Building Modules Under Appliances

In this section, the speaker explains how to build modules under appliances such as ovens and refrigerators.

Building Modules Under Appliances

• Modules can be built under appliances such as ovens and refrigerators.

• The speaker recommends using metal plates for the bottom of these modules instead of wooden boards.

• The height and width of the module should be adjusted to fit the appliance being used.

I'm sorry, but I cannot see any transcript provided. Please provide the transcript so that I can summarize it for you.

How to Calculate the Cost of LDSP or MDF

In this section, the speaker explains how to calculate the cost of LDSP or MDF by choosing the right material and checking for discounts.

Choosing the Right Material

• The cost difference between LDSP and MDF can be a few thousand rubles depending on the type chosen.

• Different types of LDSP and MDF are available, including glossy and matte finishes.

• When placing an order for cutting, it is important to specify all necessary details such as dimensions, edge thickness, and any required notches.

Checking for Discounts

• Companies may offer discounts on certain colors or materials.

• It is possible to find good deals on LDSP or MDF by shopping around and looking for promotions.

• It is important to check all items received against the order specifications and keep track of any leftover pieces.

Placing an Order for Cutting

In this section, the speaker explains how to place an order for cutting LDSP or MDF.

Ordering Process

• Orders can be placed online through websites like TDM.

• Customers must provide accurate measurements and specifications when filling out order forms.

• After receiving a quote, customers should review a cutting map before confirming their order.

Quality Control and Inspection

In this section, the speaker emphasizes the importance of quality control when ordering cut materials.

Quality Control Measures

• Companies that use CNC machines for cutting are more likely to produce accurate and precise cuts.

• Customers should double-check all measurements and specifications before accepting their order to avoid any mistakes or discrepancies.

Tips for Shopping for LDSP and MDF

In this section, the speaker provides tips for finding good deals on LDSP and MDF.

Finding Good Deals

• It is possible to find good deals on LDSP or MDF by shopping around and looking for promotions.

• Companies may offer discounts on certain colors or materials.

• It is important to check all items received against the order specifications and keep track of any leftover pieces.

Textures for Facades

In this section, the speaker discusses how to create textures for facades.

Creating Textures for Facades

• To create a texture that looks up towards a tree or other object, write the size first (e.g. 800), then the length (e.g. 600).

• If you want the texture to look down towards an object, write the length first (e.g. 600), then the size (e.g. 800).

• Be careful when creating textures with horizontal lines on facades.

• You should end up with three Excel files: one for LDSP, one for DVP, and one for facades.

Conclusion and Feedback

In this section, the speaker concludes their presentation and asks for feedback.

Conclusion and Feedback

• The speaker concludes by thanking the audience and asking for feedback on their calculator.

• They offer to make a similar calculator for other types of kitchens if requested.

• The speaker reminds viewers that creating such a tool takes time and effort.

• Viewers are encouraged to thank the author if they found their presentation helpful.