CARA MEMBUAT ATINSOFT – FOAM BOOSTER, PENGHILANG NODA MINYAK & LEMAK | Tutorial lengkap
Introduction to Atin Soap
In this section, the speaker introduces Atin soap as a main ingredient in liquid soap production. Atin is commonly used for removing oil and grease stains.
Making Atin Soap
- Atin is a key ingredient in making liquid soap, especially dishwashing soap and other cleaning solutions.
- It acts as a dirt remover, particularly for oil and grease stains.
- The process of making Atin soap will be demonstrated in the video shared by the speaker.
Greeting and Purpose of the Video
The speaker greets the viewers and explains that they will be sharing a complete tutorial on how to make high-quality and transparent Atin soap. They also mention demonstrating how to check pH levels during the process.
Tutorial on Making High-Quality Atin Soap
- The speaker welcomes viewers to their channel and wishes them well.
- They emphasize that they will provide a detailed tutorial on making high-quality, thick, and transparent Atin soap.
- The video will also cover how to check pH levels during the process.
- The resulting Atin soap can be used as an additive or main ingredient in various liquid soaps, especially dishwashing soap.
Ingredients for 1 Liter of Atin Soap
This section outlines the ingredients required for making 1 liter of Atin soap. These include Labs (250g), caustic soda (35g), and water or distilled water (750ml).
Ingredients for 1 Liter of Atin Soap
- Labs: 250g
- Caustic soda: 35g
- Water or distilled water: 750ml
Steps for Making Atin Soap - Part 1
This section explains the initial steps of making Atin soap, including preparing a caustic soda solution and mixing it with Labs.
Steps for Making Atin Soap - Part 1
- Prepare a caustic soda solution by dissolving 35g of caustic soda in 50-100ml of water. Stir until dissolved and let it cool.
- Pour Labs into a container and add some water. Mix thoroughly using a wooden or plastic spatula until well blended and homogeneous.
- As the mixture thickens, gradually add more water to the container while continuing to stir until fully mixed.
- Repeat the process of adding water and stirring until the mixture thickens again.
- Keep adding water and stirring evenly each time the mixture thickens.
- Once all the water has been added and thoroughly mixed with Labs, this completes the first stage of making Atin soap.
Checking pH Levels
In this section, the speaker demonstrates how to check the pH levels of Atin soap using litmus paper. They explain that if the pH is acidic, small amounts of caustic soda solution should be added gradually until reaching neutral pH (between 6 and 7).
Checking pH Levels
- Dip litmus paper into the Atin soap solution to observe its color change.
- The current color indicates an acidic nature (around pH 2).
- To achieve neutral pH (between 6 and 7), gradually add small amounts of caustic soda solution while continuously stirring to avoid excessive alkalinity.
- Repeat checking pH levels, adding caustic soda solution, and stirring until reaching neutral pH.
Finalizing Atin Soap
The final steps involve letting the Atin soap solution sit for a few hours until it becomes clear. The speaker then suggests transferring it to suitable containers and labeling them.
Finalizing Atin Soap
- Allow the Atin soap solution to sit for several hours until it becomes clear.
- Transfer the solution into appropriate containers.
- Label the containers accordingly.
- The process of making high-quality Atin soap, including pH neutralization, is now complete.
These notes provide a comprehensive summary of the video tutorial on making Atin soap.