How to Disassemble a Laptop Acer Aspire E15 Series E5 Upgrade RAM HDD Cleaning Cooling Fan
How to Disassemble a Laptop and Upgrade Components
Introduction to the Video
- The video is presented by Suman from Is A Technical, focusing on disassembling a laptop and upgrading its components such as RAM, HDD, Wi-Fi card, and cleaning the cooling fan.
Overview of the Laptop Model
- The specific laptop model discussed is an Acer Aspire E5-571-33YS. Viewers are cautioned that repairs are performed at their own risk.
Preparing for Disassembly
- The presenter introduces a 4 GB DDR3L RAM module purchased for around 2300 INR, highlighting that the laptop supports up to 16 GB of memory.
- Before starting disassembly, ensure the laptop is powered off and unplugged. Disconnect all cables including Ethernet or telephone modem wires.
Steps for Disassembly
- Use a Phillips head screwdriver (2.5 mm) to remove screws; specifically, 18 screws need to be unscrewed from the bottom of the laptop.
- Open the upper case gently using a plastic pry tool instead of a screwdriver to avoid breaking any parts. Disconnect any connected cables carefully.
Component Removal Process
- The internal storage (HDD), cooling fan, and Wi-Fi card are removed in sequence. Display cables are also disconnected during this process.
Installing New RAM
- To install new RAM: hold it with two fingers without rubbing it against surfaces. Insert it into the empty slot and press down evenly until secure.
Reassembly and Final Checks
- After installation, reassemble the laptop carefully by reinstalling components in reverse order.
- Restart the computer to check memory status by entering BIOS (press F2). This confirms successful installation of new memory modules.