Phonak Roger Select Guide | Eardeals

Introduction to Roger Select Microphone

Overview of the Roger Select

• The Roger Select is designed for group conversations and meetings, allowing users to take phone calls and stream audio from devices like mobile phones or tablets.

• It is a compact microphone, roughly the size of a palm, optimized for streaming audio in environments with multiple speakers.

Functionality in Group Settings

• The microphone can detect individual voices within a group and focus on that specific speaker while isolating background noise. This feature works effectively up to 10 meters away.

• Speakers can wear the Roger Select using a clip or lanyard, enabling direct voice streaming into hearing aids. Additionally, it supports audio streaming from TVs and other devices via provided cables.

Charging and Pairing the Roger Select

Charging Methods

• There are three methods to charge the Roger Select:

• Using a docking station connected to a power outlet.

• Directly plugging in the micro USB cable into the device.

• Connecting it to a laptop or USB port for charging.

• An LED light indicates charging status: flashing green during charging, solid green when fully charged (after approximately eight hours), orange/red indicating low battery.

Pairing Process

• To pair with hearing aids, ensure necessary Roger receivers are installed; consult with clinicians if needed. Manual pairing involves holding the microphone close (about 10 cm) and pressing the connect button until an indicator light changes from blue (pairing) to green (connected). If unsuccessful, it will show red instead.

Using the Roger Select for Streaming

Primary Streaming Functionality

• Place the microphone on a table surrounded by speakers; it activates six directional audio beams that isolate sounds based on who is speaking, minimizing distractions from others present.

Manual Control Options

• Users can manually control which audio beam is active by pressing corresponding buttons on its base; each press activates a green light indicating direction focus. Multiple beams can be activated simultaneously for customized listening experiences. Mute functionality is also available through central button activation indicated by a red LED light when muted.

This structured summary provides an organized overview of key features and functionalities of the Roger Select microphone as discussed in the transcript while linking back to specific timestamps for further reference.

How to Use the Roger Select for TV and Mobile Streaming

Connecting Roger Select to Your TV

• The Roger Select can be used as a supporting accessory for watching TV by placing it in its docking station and connecting the provided micro USB and optical analog cables to the power outlet and TV's optical output.

• To stop streaming audio from the TV, simply press the power button on your TV remote; audio will revert to normal playback through the TV speakers.

• For streaming audio from a phone or tablet, connect the provided audio analog cable from the Roger Select to your device’s audio port. The microphone inside will mute, allowing direct streaming to hearing aids.

Enhancing Hearing with Multiple Microphones

• The Roger Select can connect with multiple Roger microphones, such as combining it with a Roger Table Mark 2 for improved hearing options in group settings.

• By positioning one microphone on a speaker and another on a table, users can focus on key conversations while still hearing surrounding discussions.

Pairing Process for Multiple Devices

• To disconnect microphones after use, press and hold the connect button until disconnection is confirmed.

Using Bluetooth Functionality for Phone Calls

• The Roger Select allows users to answer and stream phone calls directly to their hearing aids by pairing it with their mobile phone via Bluetooth.

• During pairing, activate Bluetooth on your phone and press the connect button on the back of the Roger Select until its indicator light flashes blue. If prompted for a code, enter four zeros (0000).

Answering Calls with Ease

• When receiving an incoming call, three blue LED lights will blink every two seconds. Tap the center button of the Roger Select to answer; audio will then transfer directly to your hearing aids.

• To end or reject calls, you can either tap and hold the center button or end it directly from your phone.

Conclusion